View AP10H01_5342389.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

page 1 of 11 ap.10h.01 specifcation part no. ap.10h.01 product name 10mm smt 25db active gps patch antenna with front end saw filter feature unique smt gps active patch wide input voltage 1.8v to 3.3v ultra low power consumption rohs compliant spe-11-8-101/c/ss |
page 2 of 11 the ap.10h.01 two stage 25db active gps patch antenna is the smallest smt gps high performance embedded antenna currently available in the world. using extremely sensitive high dielectric constant powder formulation and tight process control the 10mm x 10mm x 4mm patch antenna is accurately tuned to have its frequency band right at 1575.42mhz for gps systems. a patented smt structure gives high reliability in integration. with an ultra low power consumption two stage lna with saw filter , this small active patch has the performance of an ordinary active patch, but at only a quarter of the size. this product is suited to small form factor mobile devices such as gps smartphones, personal location, medical devices, telematic devices and automotive navigation and tracking. custom gain, connector and cable versions are available. 1. introduction antenna saw filter lna*2 the ap.10h consists of 2 functional blocks C the lna and also the patch antenna. spe-11-8-101/c/ss |
page 3 of 11 2. specifcation 2.1 patch antenna 2.2 lna parameter specifcation frequency 1575.42 1.023mhz gain typ -10dbic @ zenith impedance 50 polarization rhcp axial ratio max 4.0db @ zenith dimension 10mm x 10mm x 4mm (add 7.3mm depth for vertical pcb) connection smt via solder pads parameter specifcation frequency 1575.42 1.023mhz outer band attenuation f0=1575.42mhz f030mhz 5db min. f050mhz 20db min. f0100mhz 25db min. output impedance 50 output vswr 2.0 max pout at 1db gain compression point min. 8dbm typ. 11dbm lna gain, power consumption and noise figure voltage lna gain (typ) power consumption(ma) typ noise figure typ min. 1.8v 20db 5ma 2.7db typ. 3.0v 25db 10ma 2.5db max. 3.3v 25db 23ma 1.8db input voltage min. 1.8v typ. 3.0v max. 3.3v 2.3 connection spe-11-8-101/c/ss |
page 4 of 11 3. lna gain and out band rejection @3.0v 60.00 50.00 40.00 30.00 20.00 10.00 0.000 -10.00 -20.00 -30.00 -40.00 7 5 3 1 2 4 6 1 >1 1.5754200 ghz 27.754 db tr1 s21 log mag 10.00db/ ref -40.00db (f2) 1 center 1.57542 ghz span 400 mhz 19/20 cor ifbw 70 khz cg1 tr1 s21 > 1 1.5754200 ghz 27.754 db cg1 tr1 s21 2 1.6054200 ghz - 2.2291 db cg1 tr1 s21 3 1.5454200 ghz 20.458 db cg1 tr1 s21 4 1.6254200 ghz - 32.691 db cg1 tr1 s21 5 1.5254200 ghz - 10.283 db cg1 tr1 s21 6 1.6754200 ghz - 23.132 db cg1 tr1 s21 7 1.4754200 ghz - 21.485 db 1 active ch/trace 2 response 3 stimulus 4 mkr/analysis 5 instr state spe-11-8-101/c/ss |
page 5 of 11 4. lna noise figure @3.0v 5. total specifcation (through antenna, lna) parameter specifcation frequency 1575.42 1.023mhz gain @ 3.0v 15 4dbic @ 90 output impedance 50 polarization rhcp output vswr max 2.0 operation temperature -40c to + 85c storage temperature -40c to + 85c relative humidity 40% to 95% input voltage min. 1.8v, typ. 3.0v, max. 5.5v esd capability direct discharge: 4kv min. 1 1 40.00 gain scale/ 5.000 db -10.00 mkr1 1.5754 ghz 2.558 db 27.557 db center 1.57542 ghz bw 4 mhz points 11 span 3.00 mhz tcold 296.50 k avgs off att 0/ - - db loss off corr 9.000 nfig scale/ 1.000 db -1.000 spe-11-8-101/c/ss |
page 6 of 11 6. radiation patterns 6.1 xz plane pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.10h.01 xz 1620.00 -9.20 / 42.00 -11.99 / 147.00 -10.24 rhcp 2010/4/29 -8 -10 -15 -20 -25 -30 -35 -40 90 270 180 0 spe-11-8-101/c/ss |
page 7 of 11 6.2 yz plane pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.10h.01 yz 1620.00 -9.73 / 324.00 -19.18 / 222.00 -12.80 rhcp 2010/4/29 -8 -10 -15 -20 -25 -30 -35 -40 90 270 180 0 spe-11-8-101/c/ss |
page 8 of 11 6.3 xy plane pattern model no. test mode freq (mhz) max gain(dbi) min gain(dbi) avg. gain(dbi) source polar. date 1 ap.10h.01 xz 1620.00 -9.20 / 42.00 -11.99 / 147.00 -10.24 rhcp 2010/4/29 2 ap.10h.01 yz 1620.00 -9.73 / 324.00 -19.18 / 222.00 -12.80 rhcp 2010/4/29 -8 -10 -15 -20 -25 -30 -35 -40 90 270 180 0 spe-11-8-101/c/ss |
page 9 of 11 7. technical drawing this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre all initial design kiwi 2011/11/9 a 1.soldered area 2.solder mask area(green) 3.clearance area 4.shielding case area 5.area to be solder (pad) note: name material finish qty patch (10mmx10mmx4.2mm) ceramic clear 1 1 shielding case tin (spte) tin plated 1 2 pcb fr4 0.6t green 1 3 top view bottom view side view pcb footprint front back application assembly ground side pcb thickness 0.8mm p/n ap.10h ap.10h.01 name p/n material finish qty this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre all initial design kiwi 2011/9/29 a 1.soldered area 2.solder mask area(green) 3.clearance area 4.shielding case area 5.area to be solder (pad) note: name material finish qty patch (10mmx10mmx4.2mm) ceramic clear 1 1 shielding case tin (spte) tin plated 1 2 pcb fr4 0.6t green 1 3 top view bottom view side view pcb footprint front back application assembly ground side pcb thickness 0.8mm b f5 add logo+p/n on the patch kiwi 2011/11/9 b p/n ap.10g ap.10g.01 c g3 amend drawing content sandy 2011/11/16 note: 1. 2. 3. 4. 5. spe-11-8-101/c/ss |
page 10 of 11 7.1 pcb footprint this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre all initial design kiwi 2011/11/9 a 1.soldered area 2.solder mask area(green) 3.clearance area 4.shielding case area 5.area to be solder (pad) note: name material finish qty patch (10mmx10mmx4.2mm) ceramic clear 1 1 shielding case tin (spte) tin plated 1 2 pcb fr4 0.6t green 1 3 top view bottom view side view pcb footprint front back application assembly ground side pcb thickness 0.8mm p/n ap.10h ap.10h.01 this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre all initial design kiwi 2011/11/9 a 1.soldered area 2.solder mask area(green) 3.clearance area 4.shielding case area 5.area to be solder (pad) note: name material finish qty patch (10mmx10mmx4.2mm) ceramic clear 1 1 shielding case tin (spte) tin plated 1 2 pcb fr4 0.6t green 1 3 top view bottom view side view pcb footprint front back application assembly ground side pcb thickness 0.8mm p/n ap.10h ap.10h.01 name p/n material finish qty 1 patch (10mm x 10mm x 4.2mm) ap.10h ceramic clear 1 2 shielding case tin (spte) tin plated 1 3 pcb fr4 0.6t green 1 this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre all initial design kiwi 2011/9/29 a 1.soldered area 2.solder mask area(green) 3.clearance area 4.shielding case area 5.area to be solder (pad) note: name material finish qty patch (10mmx10mmx4.2mm) ceramic clear 1 1 shielding case tin (spte) tin plated 1 2 pcb fr4 0.6t green 1 3 top view bottom view side view pcb footprint front back application assembly ground side pcb thickness 0.8mm b f5 add logo+p/n on the patch kiwi 2011/11/9 b p/n ap.10g ap.10g.01 c g3 amend drawing content sandy 2011/11/16 note: soldered area 2. solder mask area (green) 3. clearance area 4. shielding case area 5. area to be solder (pad) spe-11-8-101/c/ss |
page 11 of 11 8. packaging spe - 11 - 8 - 101/ c /ss page 11 of 11 8 .0 packaging packaged on tape and reel C 250 pieces per reel each reel is packaged C inner carton outer carton contains 5 reels C 1250 pieces per carton packaged on tape and reel 250 pieces per reel each reel is packaged inner carton outer carton contains 5 reels 1250 pieces per carton taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to nblfdibohftuptfdmdbupotboe product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third parties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd. spe-11-8-101/c/ss |

▲Up To Search▲

Price & Availability of AP10H01

	To Download AP10H01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .